| Home | About Us | Products | Services | References | Q&C Assurance | Catalogues | Our Location | Contact Us |

     

PRODUCTS

EBOMAC Low voltage and Medium voltage switchboards are type tested in international independent testing laboratories and certified by international certification bodies like "ASTA, KEMA & ACAE" The switchboards designed and tested complying to the latest international standards (IEC/BS) and local regulations (MEW-S1). The switchboards also complies to 'Kuwait Oil Company (KOC)' & 'Kuwait National Petroleum Company (KNPC)' specifications. Some of the key areas where EBOMAC switchboards are installed for more than 2 decades are Oil companies, refineries, commercial complex, industries, residential areas, MEW substations, pumping  stations, treatment plants etc. EBOMAC also manufactures the products to meet the site conditions and tailor-made to site measurements. 

Product Details

Main Low Tension Board (MLTB) :

Type PM200 switchboard is economical, multi-cubicle and type tested assembly with modular construction, floor mounted, free standing, rating upto 6000A and withstand capacity upto 100 KA for 1 sec. Product Brief...

   

Low Voltage Main / Sub-main switchboards (MSB / SMSB):

Type B.. series switchboards are economical, box / cubical type, type tested assembly, wall / floor mounted, rating upto 700 A and withstand capacity up to 40 KA for 1 sec. Product Brief...

   
 

Low Voltage Distribution Boards (FDB) :

Ebomac Distribution boards, suitable for final circuit applications, are designed for industrial & domestic use. The design is based on modular concept that provides full flexibility. Enclosures are made with specially designed dies, type flush or surface mounted. Product Brief...

 

   

Low Voltage Motor Control Center (MCC):

Type PM200 Motor Control Center is economical, multi cubicle and type tested assembly with modular construction. Design is available in single front and double front (back to back) executions in both fully draw out & fixed versions .
Product Brief...

 

   
 

Low Voltage Automatic Transfer switches (ATS):

EBomac ATS with enclosed type construction, available in wide range from 30A to 4000A. Electrically & mechanically interlocked ACB type ATS available for ratings 600A & above. Contractor / MCCB type ATS available for rating less than 600 A. Additional Manual changeover switches-Isolation provides complete isolation of ATS in case of maintenance & repair. Product Brief...

 

   

Medium Voltage Switchboards :

Type SR / SRU switchgears represent latest M.V. switching equipment in industry, commercial and utility installations involving transformers, feeder circuits, transmission & distribution lines, motor controls. These switchgears have been developed and tested in accordance with the IEC standards 60298 & 60294 so as to comply with the highest operation & safety standards. Fully type tested assembly with additionally tested for Arc fault at 26.5KA for 0.5 sec. are available for a voltage range 7.2 - 12 KV, current rating 630A - 3150A & short time withstand current values 16 - 26.3KA. Product Brief...

 

   

M.V. Automatic Transfer switches:

Construction is similar to that of the medium voltage switchgears. Designed for use in the most critical applications such as hospitals, airports, communication facilities and fit the need for dependable continuity of power where emergency or standby applications exist.

 

   

Cable Installation Accessories:

With the latest computer technology in sheet metal fabrication, requirements such as conventional cable trays or channel support system, the latest designs in wire mesh tray or the heavy duty cable ladder and under floor trunking, Ebomac can provide the product to meet you requirement.

   

Copyright 2004, EBOMAC, All Rights Reserved, Terms of Service,
www.ebomac.com